Merci de choisir local. Expédition gratuite sur commandes de plus de 150$ avant taxes

0

Your Cart is Empty

NOS PRODUITS
  • PROCHAINE FORMATION

  • Certification Fireball | 15-16 juin 2024

    Contactez-nous pour information

  • MTM Hydro 50' Hose Reel

    MTM Hydro 50' Hose Reel

    MTM Hydro reels (or hose reel) offer a consolidated and organized method to store your pressure machine hose! The hardware is not included for mounting as this is specific to your configuration, but the high quality brass swivel is recognized by many to outperform most other models in the cold water hose coil division.

    Simply slide the swivel end of your hose through the provided opening on the side of the coil core and install the 3/8" male NPT nets into the 3/8" female NPT nets of the pivot. Do not make a quick connection at the pivot because there is not enough space and the line curvature is too large. Be sure to leave some slack on the swivel joint and use the red bracket provided to secure the hose to the swivel joint. Using a pump-connected whip line, connect the 3/8" NPT male hose reel inlet. When planning, add an extra foot to the distance so as not to bend the lash line too severely. Finally, install the handle with the supplied hardware.
    Before leaving the reel unattended, always engage the locking mechanism on the side of the reel.

    Dimensions of the different MTM Hydro reels

    measurement

    50'100'150'200'



    height

    12.5"12.5"16.5"16.5"

    total width

    11"15"15"20.5"

    depth

    10.5"10.513.5"13.5"



    Wall Side Width

    7.5"12"10"16"

    Reel width

    4.375"8.75"6.375"12.5"

    Reel diameter

    4.25"4.25"5.5"5.5"
    Insert
    3/8" Male NPT3/8" Male NPT3/8" Male NPT- 9" Pigtail3/8" Male NPT- 9" Pigtail

    Base in the middle reel

    7.5"7.5"10"10"

    Mounting bracket

    4 holes-square - 3.375" to center4 holes-square - 3.375" to center4 slots-4.25" W x 3.375" D4 slots-4.25" W x 3.375" D

    hole diameter

    0.375" Circle0.375" Circle0.375" x 2.2" Slot0.375" x 2.2" Slot

    Locking mechanism

    YesYesYesYes

    Mounting accessory (not included)

    NoneNoneNoneNone