Merci de choisir local. Expédition gratuite sur commandes de plus de 150$ avant taxes

0

Your Cart is Empty

NOS PRODUITS
  • PROCHAINE FORMATION

  • Sablage & Technique de Correction de Peinture

    Dates à Venir!

  • Fireball Hydro Foam - SiO2 Wash and Coat 4L

    Fireball Hydro Foam - SiO2 Wash and Coat 4L

    Hydro Foam is a revolutionary advanced washing coating formulated with a silica-based SiO2 polymer technology. Which combines foam cleaning with full nanotechnology protection, yielding extreme hydrophobicity, slickness, and gloss. Hydro Foam’s formula was designed to gently lift dirt from solid surfaces in both a safe manner, as well as providing lubrication for washing paint when used properly. Hydro Foam works well when cleaning and recoating hard-to-reach areas. Hydro Foam is recommended as a post-wash sealant instead of a pre-wash foam. Hydro Foam is designed to work on its own or give an added boost to an existing wax, sealant, or coating layer. 

    Features & Benefits :

    - pH neutral - paintwork safe

    - Highly concentrated SiO2 foam

    - Hydrophobic boost for paintwork, glass & wheels

    - Is easily applied through a snow foam lance attached to a pressure washer

    - Creates thick, clinging foam which rinses away to leave a hydrophobic & glossy finish

    - Causes dirty water & contamination to repel from treated surfaces

    - Saves time 2-in-1 formula

    - Allows for an easier wash process in the future

    - Adds 6+ weeks of added protection

    - Concentrated formula: Dilutes up to 1:10~15

    - 500ml bottle provides up to 25 washes

    How to use :

    Simply pre-wash the vehicle thoroughly in a cooled and shaded environment.

    Dilute 1:10-1:15; equating to around 50-65ml per 1L foam lance/cannon.

    Spray a moderate amount fully covering each surface.

    Let dwell for 30-60 seconds.

    Gently apply with a wash mitt or wash pad onto surface thoroughly

    Thoroughly rinse off with water.

    Towel Dry with Twist Drying Towel or Teddy Bear Towel.

     Tips :

    To prevent staining please follow the dilution ratio and use it on a cool surface only. Do not let the Hydro Foam dry on the surface.

    When working in direct sunlight is inevitable, increase the dilution ratio of water to prevent product from drying before rinsing.