CarPro CQuartz UK 3.0 30mL Kit (With Reload)

Coat your car with the glossiest and hardest coating available on the open market!

The incredible 70% SiO2 with 99.9% purity formula is based on the same technology as the original Cquartz with some interesting tweaks. Other ceramic coatings have far less SiO2 (Quartz) in the product however CQUK has 70% SiO2 with 99.9% purity. This is the first ever coating which has this concentration! The pure quality ensures the most transparent glass coat film over the surface, which guarantees long lasting coating with extreme strength and water-repellency. Once the liquid meets the open air it cures and forms a ceramic quartz hard coating on the surface with extreme hydrophobicity and gloss beyond even that of CQuartz.

Why SiO2?

SiO2 is one of the hardest material in the world. It creates a very clear but still long lasting hard coating on automotive surfaces.

• Ease of Application.
• CQuartz UK Clarity and Purity.
• Scratch Resistant.

Kit Includes:

• (1) 30ml bottle of CQuartz UK Edition (Approximately 4-7 average size vehicles).
• (1) 100mL of CarPro Reload
• (1) Applicator Block.
• (1) 16"x16" Microfiber Suede Towel
• (4) 4" Microfiber Suede Applicators.

• Recommended working temperatures: 4 to 32°C.
• Durability: Approximately 2 years or more.
• Light swirl filling properties.
• Thick layer: 1~2 Micron each.

• If contamination exists it is recommended that you IronX and clay your vehicle before polishing.
• To gain the most from Cquartz it is recommended that your vehicle have all painted surfaces clean and polished to a high standard.
• Use CarPro Reflect to achieve an incredible high gloss finish!
• Use CarPro Eraser to remove all oils leftover from polishing which would hamper the penetration of Cquartz and seriously compromise durability.

• Wrap a 4" mf Suede around the applicator block.
• Shake CQuartz UK.
• Slowly open bottle and drag one line of product across applicator
• Spread across paint in a criss cross pattern.
• Using a 16" Suede or other proper mf towel, wipe off residue BEFORE it becomes sticky, switch out towels as needed.
• Move to next section and repeat.
• Switch out applicators often.
• Apply Reload 1 hour later or anytime after that.

• Park vehicle in direct sun after application is complete.
• Keep surface dry for at least one hour after application.
• Wipe any water off the surface during the first 24 hours after application.
• Avoid washing with any soaps for the first 7 days.