ArtDeShine Ayicon Coating 50mL

Ayicon is a coating designed specifically for reading intensely brilliant shine. Designed for professionals and hobbyists, Ayicon delivers results you can expect from a high-end certified product, with a reasonable price within reach of all users. This is a suitable choice for all installers wishing to try Artdeshine coating products.

If natural sedimentation occurs, shake the bottle well to evenly disperse the product and wait 1 minute before unscrewing the cap slowly to release the gas buildup.

Suitable for :

- All types of paint, plastics or matte trim, chrome, wraps, PPF, wheels, glass*.

Use :

- Perform all usual necessary preparations, degreasing, washing, decontamination, paint correction and surface polishing.
- Alcohol wipe down - remove any grease and polishing residues using an isopropyl alcohol solution or prep surface of your choice, as long as it is adequate for this step.
- Drain 8-10 (16-20 for a new applicator - to prepare the suede) drops of product by sliding the tip of the bottle in a straight line from top to bottom on the supplied black applicator pad (any suede, microfibre applicator block or pads are suitable).
- Apply on a surface of up to 1 m x 1 m in circular motion and cross motion for uniform coverage.
- The product applied should look like spreading liquid glue, not wet glue.
- The product becomes slightly blurry or cloudy after 15 to 20 seconds.
- Starting with the edges of the applied area, wipe off the excess with a clean, dry microfibre. A hanging sensation with microfiber laundry is normal at this stage.
- Using a clean, dry microfibre cloth, wipe all residues, cloud areas and high spots. Level using circular motions.
- Check for stains, uneven tones or streaks. Solve the above problems by applying more product to the affected areas to dissolve and spread the product.
- *IN CASE OF DIFFICULTY* You can also use a slightly damp MF towel to wipe the affected areas.
- Immediately dab with a dry MF towel until problems are resolved.
- Make sure that the surface is clear and smooth. (You can feel that the surface is already getting very smooth by levelling with the microfibre towel)
- Repeat all steps for adjacent areas.

It is not necessary to apply multiple layers with the Ayicon, it would even be considered a product loss. A second layer can nevertheless be applied to ensure a homogeneous and uniform installation. The Ayicon coating is formulated to be highly repellent and the additional layers will be repelled and will not have the necessary adhesion, and will not offer any additional durability or protection.